Programming the MHTC ADB Set-Top Box Remote Control

Find the TV code (Automatic Search):

  • Press & release the TV button.
  • Press & hold the RCU SETUP button until the TV button blinks twice.
  • Enter 9-9-1 (or the TV manufacturer’s code, if known). The TV button will blink twice (9-9-1 should NOT appear on the TV screen).
  • Aim the remote at the TV and press the POWER button once.
  • Press & release the CH+ or CH- button continuously until the TV turns off (The channel should NOT change).
  • Press the POWER button to turn the TV back on.
  • Press the RCU SETUP button to lock in the code for the TV. The TV button will blink twice.

If either the CH or VOL buttons don’t function correctly after going through the above steps, you will need to go through the steps again until the remote finds the
correct code for the TV.

Find the TV code (Brand Search):

You can also try using the manufacturer codes that came with the documentation for the TV. If you have the documentation, enter one of the codes from the list. If the code is correct, the TV button will blink twice. If not, the TV button will emit one long blink and you will have to repeat the first two steps above using a different code.
Test the remote functionality until you find the correct code for your TV.

Additional Notes:
Usually the TV is set to channel 3 unless otherwise noted by the MHTC technician or TV manufacturer. Your TV may need to be set to INPUT HDMI-1, Video-1, Component, etc. instead of Ch 3.

Lock the VOLUME button:

Control the volume on your TV regardless of what “device” is selected (TV, DVD, STB, etc.)

  • Press & release the TV button.
  • Press & hold the RCU SETUP button until the TV button blinks twice.
  • Enter 9-9-3.
  • Press & release the TV button. The TV button will blink twice.

Lock the POWER button:

Control the power to the TV without turning off the Set-Top Box.

Step 1 – Clearing One-Touch Power:

  • Press & release the STB button.
  • Press & hold the RCU SETUP button until the STB button blinks twice.
  • Enter 9-8-0. The STB button will blink several times.

Step 2 – Setting One-Touch Power:

  • Press & release the STB button.
  • Press & hold the RCU SETUP button until the STB button blinks twice.
  • Enter 9-9-5.
  • Press & release the POWER button.
  • Press & release the TV button.
  • Press & hold the RCU SETUP button until it blinks twice.
  • Press & release the STB Button.
  • Press POWER to test. If successful the TV should turn off while the Set-Top Box remains on. If not, repeat the first two steps.
Note:
Not all TV’s will program the successfully for the ADB remote.

Mount Horeb
200 East Main Street - 437-5551
Tech Support
800-843-5827 - 608-437-6850
Dodgeville
305 North Iowa Street - 930-9985